Filter
Top Products
( 22 / 32 )
Chapter 5. Connection
5.1 Connection to the Emulator Main Unit
Use the FLX120-RPD 120-pin flexible cable (included with the package) to connect the emulator
main unit and M30200T-RPD-E. Figure 5.1 shows how to connect the emulator main unit and
FLX120-RPD.
Install the FLX120-RPD connector (emulator PC4701 side) on the cable connector of the PC4701.
To insert the FLX120-RPD connector, hold the cover of the connector with the "UPSIDE" label
facing up. Then fix the screws of the cover of the connector.
Figure 5.1 Connecting emulator main unit and FLX120-RPD
Caution
Note on Connecting the Cable:
• Be sure to turn off the power before making connections. Otherwise, the internal
circuits may be damaged.