Renesas M30200T-RPD-E Network Card User Manual


 
( 7 / 32 )
Terminology
Some specific words used in this User's Manual are defined as follows:
Emulator system
This means an emulator system built around a PC4701 emulator. The PC4701 emulator system is
configured with the emulator main unit, emulation pod main unit, pod probe, host machine, and
emulator debugger.
Emulator main unit PC4701
This means a generic name for emulators for 8 and 16-bit MCUs. For details on specific models of
PC4701, visit Renesas Tools Homepage at http://www.renesas.com/en/tools
Emulation pod main unit
This means M30200T-RPD-E (this product). This emulation pod main unit is for M16C/20 series
MCUs.
Pod probe
This means a pod probe equipped with an MCU for each group of M16C/20 Series.
Host machine
This means a personal computer used to control the emulator and emulation pod.
Emulator debugger
This means the following software tool to control the emulator from the host machine through an
interface (serial, parallel, LPT parallel or LAN).
Emulator debugger M3T-PD30 V.4.00 or later
Firmware
This means a program that analyzes contents of communication with the emulator debugger and
controls the emulator hardware. The emulator contains an EEPROM. You can download from the
emulator debugger when upgrading the version of the firmware itself or when handling another
MCU.
Target MCU
This means the microcomputer you are going to debug.
Target system
This means a user's application system using the microcomputer to be debugged.