Renesas M3T-DUMMY100S Computer Hardware User Manual


  Open as PDF
of 4
 
( 2 / 4 )
1. Outline
The M3T-DUMMY100S is an accessory tool product which
connects the probe of an emulation pod and a target system.
Its dimensions are the same as those of 100-pin 0.65-mm-
pitch QFP (20 x 14 mm) IC packages (100P6S-A).
2. Package Components (see Figure 1)
(1) M3T-DUMMY100S main unit
(2) Socket main unit
(3) Socket frame for 100P6S-A (2 pieces)
(4) M3T-DUMMY100S User's Manual (This manual)
3. Applicable Sockets
The M3T-DUMMY100S has been tested with the following
IC sockets made by Matsushita Electric Works, Ltd. Be sure
to use them.
Socket main unit + socket frame (1 set):
AXS4003M295C (for 100P6S-A)
Socket frame for repair (200 pieces):
AXS4002M2 (for 100P6S-A)
4. Specifications
Table 1 Specifications
5. Usage (see Figure 2)
The M3T-DUMMY100S can be used for debugging and
onboard evaluation in common by mounting the socket main
unit on the target board.
(1) For debugging
Mount the socket main unit on the foot pattern of the
target board. And mount the M3T-DUMMY100S and the
socket frame on it. Then attach the connector of the
emulator.
(2) For onboard evaluation
Mount the socket main unit on the foot pattern of the target
board. Mount an MCU with on-chip flash memory or one-
time PROM on it. Then attach the socket frame on it.
Before using the M3T-DUMMY100S, be sure to read "8.
Precautions" on page 4.
Figure 2 Usage of the M3T-DUMMY100S
(1) Debugging
Emulator
Socket frame
for 100P6S-A
Socket frame
for 100P6S-A,
100P6P-E
(formerly 100P6S-E)
(2) Onboard evaluation
M3T-DUMMY100S main unit
Socket main unit
Foot pattern
: No. 1 pin position
Be sure to align the pins.
MCU (QFP)
(1) M3T-DUMMY100S main unit
For 100P6S-A,
100P6P-E (formerly 100P6S-E)
(Color: white)
(2) Socket main unit
For 100P6S-A
(Color: white)
(3) Socket frame
Applicable package
Max. permissible
current
Insertion/removal
iterations of connector
Insulation resistance
100P6S-A
100P6P-E (formerly 100P6S-E)
(100-pin 0.65-mm-pitch QFP)
200 mA at 5 V
20 times guaranteed
100M Ω or more
Figure 1 Package components of the M3T-DUMMY100S
 previous next