Renesas M3T-DUMMY100S Computer Hardware User Manual


  Open as PDF
of 4
 
( 4 / 4 )
8. Precautions
CAUTION
Cautions to Be Taken for This Product:
•When you use the M3T-DUMMY100S, be sure to use it with the socket frame for 100P6S-A.
•Do not solder the M3T-DUMMY100S main unit directly on a target board. Be sure to use the included socket.
• Before mounting the M3T-DUMMY100S, be sure to check the pin positions.
• Holder patterns are required at each of the four corners of the target foot pattern (see Figure 4).
• Be sure to solder the holders of the socket. An insufficient amount of solder applied to the holders may
cause a poor contact, so be careful.
• For soldering the socket and mounting the M3T-DUMMY100S, refer to the supplement "Mounting the
Socket Included with the M3T-DUMMY100S" and "Note on Handling the M3T-DUMMY100S".
• Do not apply an unnecessary stress to the M3T-DUMMY100S.
• Do not touch the pins of the M3T-DUMMY100S.
• Store the M3T-DUMMY100S in the dedicated case.
9. Correspondence of the Connectors
Table 2 Correspondence of connectors J1 and J2
IMPORTANT
Notes on This Product:
•We cannot accept any request for repair.
• To remove the socket frame, use the dedicated tool AXY8580N1 made by Matsushita Electric Works,
Ltd. To purchase this product and the socket frame for repair, contact Matsushita Electric Works, Ltd.
(http://www.mew.co.jp/e-index.html)
• For onboard evaluation, choose an appropriate socket frame made by Matsushita Electric Works, Ltd.
listed below.
For 100P6S-A package: Socket frame AXS4002M2 (for 100P6S-A)
For 100P6P-E (formerly 100P6S-E) package: Socket frame AXS4002MA2 (for 100P6P-E)
• For inquiries about this product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/en/tools
J1-1 79 J1-26 53 J2-1 3 J2-26 29
J1-2 77 J1-27 54 J2-2 5 J2-27 30
J1-3 80 J1-28 55 J2-3 6 J2-28 31
J1-4 81 J1-29 56 J2-4 7 J2-29 32
J1-5 82 J1-30 57 J2-5 8 J2-30 33
J1-6 83 J1-31 58 J2-6 9 J2-31 34
J1-7 84 J1-32 59 J2-7 10 J2-32 35
J1-8 85 J1-33 60 J2-8 11 J2-33 36
J1-9 86 J1-34 61 J2-9 12 J2-34 37
J1-10 87 J1-35 62 J2-10 13 J2-35 38
J1-11 88 J1-36 63 J2-11 14 J2-36 39
J1-12 89 J1-37 64 J2-12 15 J2-37 40
J1-13 90 J1-38 65 J2-13 16 J2-38 91
J1-14 41 J1-39 66 J2-14 17 J2-39 92
J1-15 42 J1-40 67 J2-15 18 J2-40 93
J1-16 43 J1-41 68 J2-16 19 J2-41 94
J1-17 44 J1-42 69 J2-17 20 J2-42 95
J1-18 45 J1-43 70 J2-18 21 J2-43 96
J1-19 46 J1-44 71 J2-19 22 J2-44 97
J1-20 47 J1-45 72 J2-20 23 J2-45 98
J1-21 48 J1-46 73 J2-21 24 J2-46 99
J1-22 49 J1-47 74 J2-22 25 J2-47 100
J1-23 50 J1-48 75 J2-23 26 J2-48 1
J1-24 51 J1-49 76 J2-24 27 J2-49 4
J1-25 52 J1-50 78 J2-25 28 J2-50 2
Connector
Pin No.
M3T-DUMMY100S
Pin No.
Connector
Pin No.
M3T-DUMMY100S
Pin No.
Connector
Pin No.
M3T-DUMMY100S
Pin No.
Connector
Pin No.
M3T-DUMMY100S
Pin No.
 previous