Filter
Top Products
7.1.2. Board initialisation code (hwsetup.c / hwsetup.h)
There are four common stages to the configuration of the microcontroller device. The code to demonstrate this is therefore split into four
functions. Each function is written specifically for the device supported. The function calls are shown below.
7.1.3. Main tutorial code (Main.c / main.h)
The main tutorial code is common to all tutorial projects. The display initialisation and string display functions operate on the LCD display
module. Check compatibility with a ks0066u controller and pin connection on the schematic before connecting an LCD module not supplied
by Renesas.
15