Filter
Top Products
D007394_11_S01_V01
1. Installation
Do not connect the E8 emulator hardware until the software support has been installed.
1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If
the installer does not start, browse to the RSK directory from the CD root folder and double click on ‘setup.exe’.
2. The installer will ask you which language is to be used, please choose the appropriate one.
3. On the first screen of the installer proper, click <Next>.
4. The License Agreement will be shown, click <Yes>.
5. The next screen asks you to pick the world region – please select and click <Next>.
6. Select the RSKSH7211 to install and click <Next>.
7. The destination folders are specified on the next screens. It is recommended to accept the default settings. Click
<Next> to continue.
8. Click <Next> on all screens until the Installation process commences.
9. After the installation the machine’s site code will be shown, this is not important at this stage, click <Next> then
<Finish>.
10. The Auto-update dialog box will be launched. Configure the Auto-update settings dialog to allow the installation
to be checked for available updates.
2. Connection
11. Now connect the E8 to the connector marked E8 on the RSK using the ribbon cable, also connect the LCD
module to “LCD" on the RSK ensuring that the pin 1 designation corresponds to the marking on the RSK.
12. Connect the E8 emulator to a spare USB port.
The “Found New Hardware” Wizard will appear. Please follow the steps below to install the drivers. Note that
administrator privileges are required for a Windows
TM
2000/XP machine.
13. Verify the “Recommended” option is selected and click <Next>.
14. If using Windows XP, skip to step 16; otherwise click <Next>.
15. Click <Next> to install the driver.
16. Click <Finish> to close the wizard.
Note: The Windows driver signing dialog may be displayed. Please accept the driver to continue.
3. HEW Workspace
HEW integrates various tools such as compiler, assembler, debugger and editor into a common graphical user
interface. To learn more on how to user HEW, open the HEW manual installed on your computer (Start Menu > All
Programs > Renesas > High-performance Embedded Workshop > Manual Navigator).
17. Launch HEW from the Start Menu. (Start Menu > All Programs > Renesas > High-performance Embedded
Workshop > High-performance Embedded Workshop)
18. In the “Welcome” dialog box: Verify “Create New Workspace” is selected. Click <OK>.
19. In the “New Project Workspace” dialog box: Set the “CPU Family” to “SuperH RISC Engine”, and verify the “Tool
chain” is set to “Renesas SuperH Standard”. Select “RSKSH7211” from the left hand pane.
20. Enter a name for the workspace. The project name will be automatically completed with the Workspace name.
You can change this name to “Tutorial” if required. Click <OK>.
21. On the “RSKSH7211- Step 1” window: Select “Tutorial” and click <Next>.
22. On the “RSKSH7211- Step 2” window: Click <Finish>.
23. On the Project Generator Information window: Click <OK>.
The project that is created has three configurations. The “Release” configuration can be used for the final release
code version. The “Debug” configuration allows use with the E10A on-chip debugger. The “Debug_HMon” allows the
RSK to be connected to an E8 debugger.