Ricoh 1013 All in One Printer User Manual


 
Troubleshooting
42
3
h
hh
h Loading Paper
Note
If you want to change the paper
size, see p.48 Changing the Paper
Size.
Reference
Regarding paper types and sizes
that can be used, see p.12 Copy
Paper.
A
AA
A
Make sure that the paper tray is
not being used.
B
BB
B
Pull out the paper tray until it stops.
C
CC
C
Push the metal plate down, and
then square the paper and load it
in the tray.
Important
Do not stack paper over the lim-
it mark.
If paper is left in the paper tray
and then you add paper, a mis-
feed might occur.
Note
Shuffle the paper before setting
it in the tray.
D
DD
D
Push the paper tray in until it
stops.
Loading paper in the optional
paper tray unit
A
AA
A
Make sure that the optional paper
tray unit is not being used.
B
BB
B
Pull out the paper tray until it
stops.
C
CC
C
While pinching the release lever,
adjust the back fence and side
fences.
D
DD
D
Push the metal plate down, and
then square the paper and load it
in the tray.
Important
If paper is left in the paper tray
and then you add paper, a mis-
feed might occur.
Do not stack paper over the lim-
it mark.
Load paper so that the paper
touches the right side of the
tray, or misfeeds might occur.
StellaC-AE-CopyF_V4_FM.book Page 42 Wednesday, July 4, 2001 11:21 AM