Ricoh 1013 All in One Printer User Manual


 
Troubleshooting
46
3
h
hh
h Clearing Misfeeds
R
CAUTION:
Important
When clearing misfeeds, do not turn off the power switch. If you do, your
copy settings are cleared.
To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
If paper misfeeds occur repeatedly, contact your service representative.
Note
More than one misfed areas may be indicated. In this case, check every appli-
cable area. Refer to the following charts: A, P, Y.
You can find a sticker explaining how to remove misfed paper inside of the
right cover.
When the machine instructs you to place originals once again, place your
originals in the feeding position. The display might indicate the number of
originals you should return.
The fusing section of this equipment might be very hot. You should be very
careful that you don't touch this section when removing the misfed paper.
StellaC-AE-CopyF_V4_FM.book Page 46 Wednesday, July 4, 2001 11:21 AM