Filter
Top Products
Message Cause Solution
"Classification Code is
incorrect."
The classification code is not
supported by the printer
driver.
Select Optional for the classification
code. For details about how to specify
classification code settings, see
"Registering Classification Codes",
Operating Instructions.
"Collate has been
cancelled."
Collate was canceled. Decrease the number of files sent to the
printer or install the optional SDRAM
module. For details about installing
SDRAM module, see "Installing the
SDRAM module", Operating
Instructions.
"Command Error" An RPCS command error
occurred.
Check that the communication between
a device and the printer is working
correctly.
"Compressed Data Error." The printer detected corrupt
compressed data.
• Check the connection between the
computer and the printer.
• Check that the program you used
to compress the data is functioning
correctly.
"Data storage error." You tried to print a Sample
Print, Locked Print, Hold
Print, or Stored Print file
while the hard disk was not
installed.
The hard disk is required when printing
a Sample Print, Locked Print, Hold Print,
or Stored Print.
If the message appear after installing
the hard disk, contact your service
representative.
When Messages Are Displayed
97