Filter
Top Products
103
8. Clearing Misfeeds
This chapter describes what to do when paper or originals misfeed (become
jammed inside the machine).
Removing Jammed Paper
R
CAUTION:
R
CAUTION:
Important
❒ When clearing misfeeds, do not turn off the operation switch. If you do, your
copy settings are cleared.
❒ To prevent misfeeds, do not leave any torn scraps of paper inside the machine.
❒ If paper misfeeds occur frequently, contact your service representative.
Note
❒ More than one misfeed area may be indicated. If this is the case, check every
indicated area. Refer to the following charts: A, B, C, D, P, R, Y, and Z.
❒ You can find stickers explaining how to remove misfed paper inside the right
cover and on the top of the ARDF cover.
❒ When the machine instructs you to reset originals, reset them in the feeding
position. The display will show you the number of originals to return.
• The inside of the machine could be very hot. Do not touch any parts other
than specified in this document when removing misfed paper. Otherwise, it
may cause burn injury.
• The fusing section of this machine might be very hot. Caution should be tak-
en when removing misfed paper.