Filter
Top Products
What to do If Something Goes Wrong
82
5
R
CAUTION:
Note
❒ To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒ When clearing misfeeds, do not turn off the main switch. If you do, your copy
settings are cleared.
❒ If misfeeds occur repeatedly, contact your service representative.
❖
❖❖
❖
When the open cover/unit indicator (
M
MM
M
) lights
❖
❖❖
❖
When the supply/exchange indicators light
❖
❖❖
❖
When other indicators light
•
Be careful not to cut yourself on any sharp edges when you reach inside the
machine to remove misfed sheets of paper or masters.
Monitor Guidance Display and Action Page
M
CLOSE THE COVER
• Close the original tray unit.
• Close the front door.
⇒ P.97 “When the Open Cover/Unit In-
dicator (
M
) Lights”.
CLOSE THE PLOTTER COVER
• Close the right side cover and
the plotter cover.
CLOSE THE ADF COVER
• Close the optional ADF unit.
⇒ P.97 “When the Open Cover/Unit In-
dicator (
M
) Lights”.
SET THE DRUM COMPLETELY
Monitor Guidance Display and Action Page
B
LOAD MORE PAPER ⇒ P.73 “Loading Paper on the Paper
Feed Tray”.
j LOAD NEW INK CARTRIDGE ⇒ P.75 “When the Add Ink Indicator
(
j
) Lights”.
C
LOAD NEW MASTER ROLL ⇒ P.77 “Master Roll Replacement”.
k EMPTY MASTER EJECT BOX
• Remove the used master.
⇒ P.99 “When the Master Eject Indica-
tor (
k
) Lights”.
SET THE MASTER EJECT BOX
Monitor Guidance Display and Action Page
u SET THE KEY COUNTER ⇒ P.100 “When Other Indicators
Light”.
SilverV-gb.book Page 82 Monday, May 15, 2000 3:32 PM