Filter
Top Products
5.
PC Connections
The drive connects to the motherboard of the host computer using an IDE interface cable.
Both Primary and Secondary connectors are usually provided on the motherboard, which may be
connected as follows:
Master1.
Slave2.
Motherboard3.
Primary4.
Secondary5.
less than 6 inches6.
less than 18 inches7.
To Install as a Master Drive
To Install as a Slave Drive
To Install as a Master Drive
To install the drive as a Master, the jumper can be left as supplied from the factory.
Master drive (MP9060A)1.
Master drive (Booting hard disk)2.
Secondary connector3.
Primary connector4.
Slave drive (Other IDE drive)5.