Filter
Top Products
8.
Device Drivers
When using Windows 98/95 or Window NT Workstation Ver. 4.0, the installation of any special
device drivers are not required.
In order to ensure normal drive operation or if the drive is not recognized by your computer,
please check the following:
In order to ensure normal drive operation
If the drive is not recognized by your computer
In order to ensure normal drive operation
please check the following
For Windows 98/95 Users
The drive is displayed in [control panels] - [system] - [device manager] - [CD-ROM]●
32-bit is displayed in [control panels] - [system] - [performance]●
For Windows NT Workstation Ver.4.0 Users
The drive is displayed on the IDE controller in [control panels] - [SCSI adapter] -[devices]●
If the drive is not recognized by your computer
For Windows 98/95 Users
If a [!] indicator is displayed on the IDE controller in [control panels] - [system] -[devices
manager]-[harddisk controler], you will need to contact your PC manufacturer or the
motherboard manufac-turer and get the appropriate IDE controller driver.
●
For Windows NT Workstation Ver.4.0 Users
If a [!] indicator is displayed on the IDE controller in [control panels] - [SCSI adapter]
-[devices] , you will need to contact your PC manufacturer or the motherboard
manufacturer and get the appropriate E-IDE controller driver.
●
Back
1. Jumper Set Up | 2. Removing the Computer Cover
3. Mounting the Drive | 4. Connecting the Power Connector
5. PC Connections | 6. Sound Card Connection
7. Replacing the Computer Cover | 8. Device Drivers
<< Contents