Filter
Top Products
Accessing User Tools ( System Settings )
21
3
Accessing User Tools ( System Settings )
This section is for key operators in
charge of this machine.
User Tools allow you to change or set
defaults.
Note
❒ Operations for system settings dif-
fer from normal operations. Al-
ways quit User Tools when you
have finished. See p.22 “Quitting
User Tools”.
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the {Clear
Modes} key is pressed.
Changing Default Settings
Note
❒ If a key operator code is already
set, the key operator code entry
display appears. Enter the key op-
erator code, and then press the
{OK} key. See p.27 “Key Operator
Code”.
A Press the {User Tools/Counter} key.
B Select [System Settings] using {U}
or {T}, and then press the {OK}
key.
C Select the menu using {U} or {T},
and then press the {OK} key.
Reference
p.19 “User Tools Menu ( Sys-
tem Settings )”.
D Select the item using {U} or {T },
and then press the {OK} key.
E Change settings by following in-
structions on the display, and
then press the {OK} key.
Note
❒ To cancel changes made to set-
tings and return to the initial
display, press the {User
Tools/Counter} key.
ARK033S
StellaC3L_GSG_F-AE_FM_forPaper.book Page 21 Monday, September 11, 2006 4:00 PM