Filter
Top Products
Troubleshooting
40
4
F Square the paper and load it in
the tray.
Important
❒ Be sure to set the paper under
the roller.
❒ Do not stack paper over the lim-
it mark.
G While pressing the release lever,
adjust the side fences to the new
paper size.
Important
❒ When setting small quantities of
copy paper, be careful not to
squeeze in the side fence too
much or paper will not feed in
properly.
H While pressing the release lever,
set the back fence to the new size.
I Push the paper tray in until it
stops.
Changing the Paper Size in the
Paper Tray Unit (Tray 2)
A Make sure the paper tray is not in
use.
B Pull out the paper tray until it
stops.
Note
❒ Remove any remaining copy
paper.
C While pinching the release lever,
adjust the back fence.
ARK015S
ARK016S
ARK017S
StellaC3L_GSG_F-AE_FM_forPaper.book Page 40 Monday, September 11, 2006 4:00 PM