Filter
Top Products
Changing the Paper Size
41
4
When loading 8
1
/
4
" × 14"L or
8
1
/
2
" × 14"L size paper
A Pull the back fence off from
the tray.
B Place it in the corner pocket on
the left.
D While pressing the release lever,
adjust the side fences.
E Push the metal plate down, and
then square the paper and load it
in the tray.
Important
❒ Do not stack paper over the lim-
it mark.
❒ Load paper so that the paper
touches the right side of the
tray, or misfeeds might occur.
F While pinching the release lever,
adjust the side and back fences to
the new paper size.
Important
❒ When loading small quantities
of copy paper, be careful not to
squeeze in the side fence too
much or paper will not feed in
properly.
G Push the paper tray in until it
stops.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 41 Monday, September 11, 2006 4:00 PM