Using the Scanner Function
50
2
Placing on the Exposure Glass
Originals that do not fit into the ARDF, such as sheets with glued-on parts,
books, etc., can be placed directly on the exposure glass for scanning.
For details about originals that you can place on the exposure glass, see Copy
Reference.
A Lift the exposure glass cover or the ARDF.
Lift the exposure glass cover or ARDF to an angle of more than 30 degrees. The
opening/closing action triggers the automatic original size detection process.
B Place the original on the exposure glass with the side to be scanned facing
down. Align the original with the back left corner mark.
There are two original orientations.
❖
When placing the original so that the top edge touches the rear of the exposure glass
1. Positioning mark
R
ABF007S