Filter
Top Products
12
Connections and settings
Connection
example 3
Connecting the VS-2400CD and an ADAT device
This example allows digital audio signals to be transferred. Make connections as shown in
the diagram.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn
off the power on all devices before making any connections.
■ Sampling Frequency settings
Set the sampling frequency of the VS-2400CD and ADAT device to the same setting
(44.1 kHz or 48 kHz).
■ Master Clock settings
You'll also need to set the Master Clock for the ADAT device. For details on this setting, refer to the owner's
manual for the ADAT device.
Master clock device VS-2400CD setting
DIF-AT24
MASTER CLK switch
VS-2400CD
PROJECT PARAMETER screen
❍ MASTER CLOCL................INT
R-BUS
ADAT device
PROJECT PARAMETER screen
❍ MASTER CLOCL................R-BUS
ADAT
ADAT device
VS-2400CD
DIF-AT24
R-BUS
R-BUS
ADAT OUT
ADAT OPTICAL IN
ADAT IN
ADAT OPTICAL OUT
Settings