Filter
Top Products
CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATINS MANUAL
27
Appendix D. Rack mount instructions
The optional rack mount kit includes the following items:
Two black anodized mounting brackets.
Four 6 - 32 x 3/8” flat head mounting screws.
To rack mount your CrystalView Pro CAT5, attach the two rack mounting
brackets to your Unit with the short flange against the Unit using the four
screws provided. Do not over tighten the screws used to mount the Unit to
the mounting brackets. Use only the hardware provided, using hardware
other than that provided could cause damage to the electronics and/or result
in loss of mounting integrity. Secure the mounting brackets to the rack
using the appropriate size bolts, nuts and lock washers.
The following guidelines should be observed when installing.
a). Do not exceed the operating temperature of 10
ο
C to 45
ο
C.
b). Do not block power supply vents or restrict airflow.
c). Mechanical loading of the rack should be considered to prevent
instability and possible tipping over.
d). Tighten all connectors securely and provide adequate strain relief for
all cables.
Appendix E. Rack mount illustration