Filter
Top Products
INSTALLATION
Vista KVM-Series Installation and Operations Manual
9
Installation
Installation of the Vista switch consists of the following steps:
1. Connect the KVM station to the Vista switch
2. Connect the CPUs to the Vista switch
3. Sequentially apply power, boot the CPUs
4. Verify keyboard, mouse and CPU operation
It is recommended that the CPUs be powered off.
Step 1 - Connecting the KVM station
Connect your KVM station’s keyboard, video monitor and mouse cables to
the corresponding Vista switches’ keyboard, video monitor and mouse
connectors as shown in Figure 4.
Figure 4. Vista to KVM station