Filter
Top Products
SATA II/ATA 133 PCIe Card RC216 User Manual
11
directions below.
1. Setup the RAID Array prior to Windows installation.
2. Follow Microsoft’s Windows installation procedure.
3. Restart the computer when prompted by Windows’ installation.
4. At the Windows Setup screen, press F6 to install the RAID driver.
5. When prompted, press S to specify the location of the driver.
6. Insert the floppy disk, then press Enter.
7. Select (Windows 2000) RAID Driver for JMicron JMB363
Controller or (Windows XP/2003) RAID/AHCI Driver for JMicron
JMB36X Controller, then press Enter.
8. Press Enter to finish driver installation, then follow the on-screen
instructions to complete the Windows installation.
For An Existing Installation
1. Setup the RAID Array prior to driver installation and boot up to
Windows.
2. At the Found New Hardware Wizard window pop-up, please click
Cancel button to cancel the driver installation for the device at this
moment. The driver for this device will be installed in the next step.
3. Please insert the CD driver bound with PCIe SATA II 300 + PATA
Raid Card into your CD-ROM Drive.
4. At the Windows desktop, click Start, then Run.
5. Type D:\ RC-216\Setup.exe, click OK. (Change D:\ to match your