Filter
Top Products
SATA II/ATA 133 PCIe Card RC216 User Manual
13
Windows.
2. At the Found New Hardware Wizard window pop-up, please click
Cancel button to cancel the driver installation for the device at this
moment. The driver for this device will be installed in the next step.
3. Please insert the CD driver bound with PCIe SATA II 300 + PATA
Raid Card into your CD-ROM Drive.
4. At the Windows desktop, click Start, then Run.
5. Type D:\ RC-216\Setup.exe, click OK. (Change D:\ to match your
CD-ROM drive letter)
6. Follow the on-screen instructions to complete the installation.
7. Restart Windows to complete the installation.
For Windows® Vista
For New Installation
A new installation requires a floppy disk for the driver installation. To
make this floppy disk, copy the contents of the “RC-216\Floppy32”
folder, found on the driver CD, onto a blank floppy disk then follow the
directions below.
1. Setup the RAID Array prior to Windows installation.
2. Follow Microsoft’s Windows installation procedure.
3. Restart the computer when prompted by Windows’ installation.
4. At the Windows Setup screen, press Load Driver to install the
driver.