Filter
Top Products
SATA II/ATA 133 PCIe Card RC216 User Manual
14
5. Insert the floppy disk, please select JMicron JMB36X Controller
(A:\jraid_f.inf), then press Next. (Change A:\ to match your floppy
drive letter)
6. Follow the on-screen instructions to complete the Windows
installation.
For An Existing Installation
1. Setup the RAID Array prior to driver installation and boot up to
Windows.
2. At the Found New Hardware Wizard window pop-up, please click
Cancel button to cancel the driver installation for the device at this
moment. The driver for this device will be installed in the next step.
3. Please insert the CD driver bound with PCIe SATA II 300 + PATA
Raid Card into your CD-ROM Drive.
4. At the Windows desktop, click Start, then Run.
5. Type D:\ RC-216\Setup.exe, click OK. (Change D:\ to match your
CD-ROM drive letter)
6. Follow the on-screen instructions to complete the installation.
7. Restart Windows to complete the installation.
For Windows® Vista-x64
For New Installation
A new installation requires a floppy disk for the driver installation. To