Filter
Top Products
4. Press Foot Switch one time for "RUN", press one more time for "STOP".
(Don't keep pressing)
5. After use of Remote Control, attach it to the left side of rear of machine
**Cross Cutter**
1. It is on the back side of the machine.
2. After lamination, move cutter to a point about
1/3 of the width of lamination
3. Grasp film with one hand and press the cutter
cutter downward and slide it to the direction
intending to cut with another hand.
4.Press the cutter and slide it the other way.
1.Please be cautious that neck tie, necklace,
long hair, clothes are kept well away while operation.
2. Prevent children from accessing the machine
METHOD FOR USING CUTTER
IMPORTANT SAFETY CONCERNS
- 23 -