Filter
Top Products
22
© 2008 RuggedCom Inc. All rights reserved Rev106
4.6.3 Protection on Twisted-Pair Data Ports
RuggedCom does not recommend the use of CAT-5 cabling of any length for critical real-time
substation automation applications. However, transient suppression circuitry is present on all
copper ports to protect against damage from electrical transients and to ensure IEC 61850-3 and
IEEE 1613 Class 1 conformance. This means that during the transient event communications
errors or interruptions may occur but recovery is automatic.
RuggedCom also does not recommended to use these ports to interface to field devices across
distances which could produce high levels of ground potential rise, (i.e. greater than 2500V) during
line to ground fault conditions.