Filter
Top Products
A fixed pixel display can be one of several types of displays, including Plasma (flat panel) displays,
DLP™ projectors, LCD projectors and D-ILA projectors. Selecting a scan rate for these types of
displays is actually quite easy since the display has a fixed resolution, commonly known as the
display's native resolution.
To determine which scan rate output to use, first determine your display's native resolution.
For example, if you have a DLP™ or an LCD projector with a native resolution of 1024 x 768, set the
SCAN RATE for 1024 x 768.
Runco recommends that for fixed-pixel displays the output scan rate ALWAYS be set to match the
native resolution of the display for best results. Selecting a resolution output higher or lower than that
of the native resolution of the display will cause the display to scale the image, resulting is decreased
resolution and performance.
If you have a fixed-pixel display and its native resolution does not match any of the resolution outputs
of the PFP-7/PFP-11, try different resolutions to see which one gives you the best picture quality.
20
Fixed Pixel Displays