Filter
Top Products
Installation
Runco VX-6000d Installation/Operation Manual 39
PRE
L
IMINAR
Y
Connecting 12-volt
Trigger Outputs to
External Equipment
DHD Controller: If your VX-6000d is equipped with a CineWide with AutoScope system,
connect the AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see
Figure 3-17.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.
For more information on using the DHD Controller triggers, refer to Triggers on page 70.
Figure 3-17. 12-volt Trigger Output Connections (from DHD Controller)
Tip = +12V
Sleeve = Ground
AutoScope Lens Motor
3.5-mm
mini plug
AC Input
Power
Switch
Retractable Screen or other
12-volt trigger-activated
device