Ryobi ESR2400A Paper Shredder User Manual


 
Maintain tools with care.
Keep the blades sharp and the exit shoot clean for better
and safer performacnce. Follow instructions for changing
accessories. Do not use the shredder if it is damaged in
anyway.
Inspect power leads and cords
Inspect the plug and cord each time when the shredder is
used. If damaged, have it repaired at an authorized service
centre. Inspect extension cables regularly for signs of
damage or aging. Replace if damaged. The shredder should
not be used if the condition of the connection cord is not
satisfactory.
Check damaged parts
Before further use of the tool, any part that is damaged
should be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, breakages of parts, mounting
and any part that is damaged should be properly repaired
or replaced at an authorized service centre unless otherwise
indicated in the instruction manual. Have defective switches
replaced at an authorized service centre. Do not use the
tool if the switch does not turn it on and off.
Stay alert
Watch what you are doing. Use common sense. Do not
operate the shredder when tired.
Warning!
The use of any accessory or attachment, other than those
recommended in this instruction manual, may present a
risk of personal injury.
Have the shredder repaired by a qualified service centre.
This shredder is constructed inaccordance with the relevant
safety requirements.
Repairs should only be carried out by qualified service
centre using original spare parts, otherwise this may result
in considerable danger to the user.
English
GENERAL SAFETY RULES
CAUTION! Read and understand these instructions.
When using garden tools observe them to protect
against electric shock, risk of fire and serious injury.
Keep work area tidy
Cluttered work areas increase the risk of accident and
injury. Keep the work area that is to be used clear of
clutter.
Consider the work environment
Keep work area well lit. Do not expose tools to rain. Do
not use tools in damp or wet location. Do not use the
tools in the presence of flammable liquids or gases.
Gaurd against electric shock
Avoid body direct contact with earth or ground surfaces.
Keep away from children
Children under 16 years of age should not operate the
shredder. The operator shall be responsible for the safety
of person in the operating zone of the shredder.
Personal safety
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use tools while
tired or under the influence of drugs, alcohol or medication.
Store tools in a secure place
When not in use, tools should be stored in a dry, high or
locked-up place, out of reach of children.
Dress properly
Rubber gloves and non-skid footwear are recommended
when working outdoors.
Do not wear loose clothing or jewelry. Contain long hair.
Do not operate the shredder without the hopper.
When starting up or switching on the motor, the feeding
device and discharge chute shall be in the closed position.
Never reach into the shredder when it is running or plugging in.
Make sure the shredder is standing on a level and a firm
base and will not topple over.
Do not overreach
Keep proper footing and balance at all times.
Before leaving the shredder, it shall be switched off.
The shredder should be assembled in accordance with
the instruction manual before switching on.
Read these instructions before using the shredder
and keep them in a safe place for future reference.
- 3 -