Filter
Top Products
English
SPARE PARTS
1. hopper
2. body
3. motor and blades
4. plunger
5. stand
6. complete wheel
7. axle
8. power plug
9. overload switch
10.switch on/off
11. securing knob
ACCESSORIES
Plunger, Allen key, Spanner.
TECHNICAL DATA
Voltage:
Power:
RPM:
Ø branches:
Acoustic pressure:
Acoustic capcity:
Weight:
240V 50Hz
2400W
2900 rpm
max: Ø40mm
86 Db(A)
106 Db(A)
21.5kg
Do not overload: after 4 or 5 min, work, take a break for
5-6 min. start again.
ASSEMBLING THE UNIT
Connect the 2 parts of the motor-housing using the
washers and auto-securing bolts (3).
Place the axle in between the 2 parts of the stand (4).
Assemble the wheels using the washers and screws
with the spanner (5) press the plastic wheel covers into
place.
Take off the securing knob (6)
Place the housing (7) on the stand by fastening the hex
auto-securing screws.
Place the hopper (2) on the top and secure with 3 screws
(8).
GETTING STARTED
Start the shredder and feed the material to be shredded
into the plastic hopper. Do not feed the material in until
the shredder is running.
What can be shredded
Healthy hedge and tree pruning, dead flowers.
What cannot be shredded
Do not try to shred hard materials like glass, metal or
bones.
Do not try to shred plastic, polythene, rope, etc.
Do not try to shred food left-over, fish or meat.
Do not shred treated timber-the dust and compost it
makes will be toxic.
Do not shred pruning with fungus or decays-take these
to the dump.
Before you start shredding clippings or branches,
remove side shoots with a pair of secateurs to make it
easier to get the branches into the shredder.
Be careful, as injury to face or eyes may result.
OPERATING INSTRUCTIONS
Check that the shredder is properly assembled.
Place the shredder on a level and a firm surface to
prevent it topping over. If working on soft ground, rest the
shredder on a board.
Check that the extension lead is safe and the safety plug
is plugged into the MAINS SOCKET.
The safety switch which is located on the cutter base is
activated when the Top Hopper assembly is opened to
help prevent accidental starting.
(See Fig. 10)
Plug the shredder in.
When the shredder is used for the first time switch it ON
and then OFF to ensure the switch works and to
accustom yourself to the switch.
(See Fig. 6)
Make sure that you wear, safety glasses, gloves and ear
protection.
- 6 -