Filter
Top Products
English
TOOLS USE AND CARE
Use the right tool. Do not force small tools or attachments
to do the job of a heavy duty tool. The correct tool will
do better and safer at the rate for which it is designed.
Ensure the switch is changed to off position if the power
is goes off suddenly during use. This may prevent you
from injury cause by sudden power recovery.
Never carry a tool by the cord or pull it to disconnect it from
the socket. Keep the cord away from heat, oil and sharp edges.
In case of jamming during operation, please switch off
immediately and disconnect the plug from the AC-outlet.
Avoid unintentional starting. Do not carry a plug in tool with
your finger on the switch. Ensure the switch is off when plugging
in.
SAVE THESE INSTRUCTIONS
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUTHORIZED SERVICE CENTRE for repair. When
servicing, use only identical replacement parts.
SERVICE
WARNING:
Observe all normal safety precautions related to
avoiding electrical shock.
WARNING:
To avoid serious personal injury, do not attempt to
use this product until you read thoroughly and
understand completely the operator’s manual. Save
this operator’s manual and review frequently for
continuing safe operation and instructing others
who may use this product.
WARNING:
The operation of any power tool can result in
foreign objects being thrown into your eyes,
which can result in severe eye damage. Before
beginning power tool operation, always wear
safety goggles or safety glasses with side shields
and a full face shield when needed. We
recommend Wide Vision Safety Mask for use
over eye glasses or standard safety glasses
with side shields. Always use eye protection.
Disconnect tools, when not in use before servicing and changing
accessories.
Maintain tools with care.
STAY ALERT Keep cutting tools sharp and clean for better
and safer performance. Follow instructions for changing
accessories. Inspect tool cord periodically and if damaged
have it repaired by an authorized service certre. Inspect
extension cords periodically and replace, if damaged. Keep
handles dry, clean and free from oil and grease.
STAY ALERT Have your tools repaired by a qualified service
centre. This electric tool is inaccordance with the relevant
safety rules. Repairs should only be carried out by qualified
service centre using original spare parts, otherwise this may
result inconsiderable danger to the user.
Warning! The use of any accessory or attachment other than
those recommended in this instruction manual, may present
a risk of personal injury.
PRECAUTIONS FOR USING SHREDDER
Machine should be operated on firm level surfaces only.
Before starting the machine, check that the cutting chamber
is empty.
Motor should be kept clean of debris and other
accumulations.
WARNING: If machine should become clogged; switch
off the motor, disconnect the power lead, make sure all
moving parts are completely stopped before cleaning
clogged debris.
Keep all guards and deflections in good working condition.
Stand clear of discharge chute at all times.
Do not over reach and keep face and body back from the
feed opening.
WARNING: Ensure the power cord is always in good
condition. A cord with broken insulation is extremely
dangerous and can result in fire, electric shock, or serious
personal injury.
Never pull the machine by the power cord and keep cord
away from water and sharp edges.
Disconnect the power cord when the machine is not in use.
WARNING: The operation of any tools can result in foreign
objects being thrown into your eyes, which can result in
severe eye damage before operating power tool, always
wear safety goggles or safety glasses with side shields and
a full face shield when needed. We recommend wide vision
safety mask for use over eye glasses or standard safety
glasses with side shields.
- 5 -