Filter
Top Products
ER-380 / ER-380M Program Mode Programming
•
89
Program 110 - PLU Auto Tare Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 1 1 0, press the SBTL key
0 SBTL1 1
3. Select the PLU or PLUs you wish to program in one of the following ways:
Press on the keyboard, or
PLU
Press the first PLU keys that are to receive the same status and Press the last PLU
keys, or
PLU PLU
Enter up to 15 digit number of the PLU and press the
PLU
key, or
PLU
Enter the PLU#,
up to 15 digits
Enter the number of the first PLU in a range of PLUs that are to receive the same setting,
and press the PLU key. Enter the last number in the range; press the PLU key.
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
4. Enter a value (1-5) to indicate the number of the preprogrammed tare weight you want to
automatically subtract when the PLU is used for scale entry (using an optional scale). Enter 0 to
disable automatic tare subtraction.
X/TIME N
5. Program additional PLUs, repeat from step 3, or press the CASH key to finalize the program
CASH