Filter
Top Products
SAM4s ER-5115 Electronic Cash Register Programming
155
Drawer Limit Programming
You can set the total amount of cash and checks allowed to be in cash drawer at one time. (When the
limit is equaled or exceeded, the error tone will sound at the completion of each transaction. You can
clear the error to continue operations, or you can use the Paid Out function to remove enough cash or
checks to reduce the drawer total below the limit set here.)
Programming the Drawer Limit
1. Turn the control lock to the P position.
2. To begin the program, enter 1 2 0 0, press the SBTL key.
0 SBTL021
3. Enter a drawer limit (up to 8 digits or 0 for no limit); press the X/TIME key.
X/TIME
Enter the drawer
limit, up to 8
digits
4. Press the CASH key to finalize the program.
CASH
Machine Number Programming
You can set a machine number to print on the receipt and journal paper. If you have multiple
registers or stores, use this number to identify the machine where the transaction took place.
Programming the Machine Number
1. Turn the control lock to the P position.
2. To begin the program, enter 1 3 0 0, press the SBTL key.
0 SBTL031
3. Enter a machine number (up to 2 digits); press the X/TIME key.
X/TIME
4. Press the CASH key to finalize the program.
CASH