Tank Initialization:
The tank screens are used to set up the tanks in the system. Each tank is
assigned a number and a starting quantity level in the desired unit of
measure. The following is the process for installing a tank:
• Maximum of 8 Tanks
• Tank ID’s are numbered 1 thru 8
• Tank unit of measure can be quarts, liters, pints or gallons
• By default, the unit of measure is liters
• Set the dispensing unit of measure to the proper value
• The tank stock level setting is updated after each dispense from the
associated tank.
• The tank stock level quantity setting Format is 5.3 digits
(99999.999)
• The remaining tank stock level quantity will be printed out to the
nearest whole number after each dispense on the ticket.
• The Supervisor may update the tank stock level quantity setting at
any time by entering these screens to change stock levels
Tank Unit
Tank No -
Active keys:
Numeric keys,
, ,
Action:
• Enter key with no entry jumps to Fluids Screens
Enter a numeric value from 1 to 8 and press
Tank Unit
LITERS
Active keys:
Numeric keys,
, , ,
Use to select between LITERS, GALLONS, PINTS, QUARTS and
REMOVE (REMOVE option will delete the tank from the system.)
Press
to move to the next screen.
Samson Corporation-Swannanoa, NC 28778 800.311.1047 www.samsoncorporation.com