Filter
Top Products
1) Contrast
: Adjusts the Contrast of the PIP window on the screen.
2) Brightness
: Adjusts the Brightness of the PIP window on the screen.
3) Sharpness
: Adjusts the Sharpness of the PIP window on the screen.
4) Colour
: Adjusts the Colour of the PIP window on the screen
5) Tint
: Adds a natural tone to the PIP window.
Available : PIP ON
The Tint is connected by switching to NTSC from PAL
broadcasting and is displayed on the menu while watching.
But it is not displayed when watching a general PAL
broadcast.
For more information, see Broadcasting system by Country.
TV / Ext. / AV / S-Video / Component / HDMI Mode
Available Mode
: PC / DVI
: TV : Ext. : AV : S-Video : Component : HDMI
The default setting may be different depending on the selected Input Mode (input signal
SOURCE selected in External Input List) and the selected resolution.
OSD Description Play / Stop
Mode
The Monitor has four automatic picture settings ("Dynamic", "Standard",
"Movie", and "Custom") that are preset at the factory.
You can activate either Dynamic, Standard, Movie, or Custom. You can
select "Custom" which automatically recalls your personalized picture
settings.
The direct button on the remote control is the 'P.MODE' button.
1) Dynamic
2) Standard
3) Movie
4) Custom
Custom
You can use the on-screen menus to change the contrast and brightness
according to personal preference.
1) Contrast
: Adjusts the contrast.
2) Brightness
: Adjusts the brightness.
3) Sharpness
: Adjusts the picture sharpness.
4) Colour
: Adjusts the picture colour.