Filter
Top Products
OSD Description Play / Stop
Language
You can choose one of 8 languages.
Note :
The language chosen affects only the language of the OSD.
It has no effect on any software running on the computer.
Sleep Timer
Turns the monitor off after a pre-determined period of time.
1) Off 2) 30 3) 60 4) 90 5) 120 6) 150 7) 180
The direct button on the remote control is the 'SLEEP' button.
Transparency
Changes the opaqueness of the background of the OSD.
1) High
2) Medium
3) Low
4) Opaque
Blue Screen
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to continue
viewing the poor picture, you must set the "Blue screen" mode to "Off".
Off
On
Reset
Picture parameters are replaced with the factory default values.
1) Image Reset
2) Colour Reset
1
)
Ima
g
e Reset
2) Colour Reset
HDMI Black
Level
When a DVD or set-top box is connected to your TV via HDMI, it may cause
a degradation in the screen quality, such as an increase in the black level, a
low contrast, or discoloration, etc., depending on the external device
connected. In this case, adjust the screen quality of your TV by configuring
the HDMI black level.
Normal
Low