Filter
Top Products
English 22
English
FrançaisDeutschEspañolPortuguese Italiano
* According to our R&D Lab test result, "Channel auto program" usually takes around 5
minutes to scan 125 channels. The scanning can be longer or shorter depending on the number
of channels and the video source whether the video source is from cable or air.
* Upon completion of "Channel auto program", the result of the channel search is stored in
designated internal memory. Each found channel is indexed into that memory and the channel
indices are used as a look up table. In other words, when a user changes the channel, the mon-
itor refers to the look up table to find the appropriate channel freqency instead of performing
physical frequency scanning which gives a lot slower tuning result. In rare cases, "Channel
auto program" may miss a channel due to weak signals or for other reasons. To add a channel,
please enter the channel number by using the numeric key pads on the remote controller, then
use "Fine Tune" menu in the "TV Setup" menu from OSD. When you finish fine tunning the
channel you want to add, select "Save".
Adjusting Your LCD Monitor
5_E240MP22p.fm Page 22 Thursday, July 12, 2001 10:26 AM