Filter
Top Products
Set an address to be registered.
(You have to set the shared IP and folder name.)
Connect
Connect to NFS using the registered nick name and address. If the
connection is successfully established, the following ( , ) Open
and Add buttons are activated.
Path
Shows a successfully connected NFS path.
Open
File Navigation window appears where you can select a file (TEXT
(.txt) data) using the successfully established connection
information.
Add
Load TEXT(.txt) data of the path set in the File Navigation, copy
the data to the server PC and save the data onto the DB.
=>In an original text (.txt) data file, "," and "LineFeed" are used
as delimeters between cells that are determined during the Multi
Screen edit operation.
Registered files
A window that shows DB information.
Edit
A window appears where you can set Raw data
Interval/Interval/Display interval for TEXT(.txt) data.
If you select multiple TEXT(.txt) data, only the first data of the list
is modified.
=> Raw data Interval : Time to load original TEXT(.txt) data file
into the buffer.
Interval : The time to create a file with the data loaded in the
buffer by separating the data into the number of columns and rows
set during the Multi Screen edit operation.
Display interval : The time to refresh the monitor screen.
Delete
Delete a selected TEXT(.txt) data among the registered TEXT(.txt)
data.
(Multiple selection by Shift or Ctrl key is supported for deletion)
4. FTP : Supportable for SyncMaster 320PXn/400P(T)Xn/460PXn only
FTP
You can register TEXT(.txt) data through FTP.
Nick Name
You can name the nick name of a TEXT(.txt) data to be registered
so that it can be used for load and edit operation. (If you register
with the same nick name, the existing data, which has been
registered with the nick name, is replaced with the new one.)
Address
Set an address to be registered.
Connect
Connect to FTP using the registered nick name and address. A pop-
up window appears where you can enter the ID and password for
the FTP. If the connection is successfully established, the following
( , ) Open and Add buttons are activated. ( ) Path : Shows the
path of the succefully connected FTP.
Path
Shows the path of the succefully connected FTP.
Open
File Navigation window appears where you can select a file (TEXT