Filter
Top Products
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Using the D-sub (Analog) connector on the video card.
- Connect the D-Sub Cable to the VGA IN port on the back of your monitor.
[VGA IN]
To use the D-Sub (analog) output through another device (monitor, TV, projector, etc.)
- Connect the VGA OUT port of the monitor and the D-Sub port of another device using the D-Sub
cable.
[VGA OUT]
Using Macintosh
- Connect the monitor and the Macintosh computer using the computer connection cable.
If you are using an old model Macintosh, connect the monitor and the Macintosh using a Macintosh
adaptor (sold separately).
If the monitor and the computer are connected, you can turn them on and use them.
External Device Connection