Filter
Top Products
Select a port to use with printer, a printer manufacturer, and printer. If you set the added printer
as the default printer, printing is performed with this printer unless you specify a different printer.
If you double-click an existing printer icon or click the Open button, the Printer Properties window
is displayed, which allows you to change the properties for the printer.
Terminal Host PC Client License
If you select an item in the list of saved licenses, its content is displayed on the window below.
Click Delete]to delete the selected license. Click Save to save the selected license.
Volume and Sound
With Volume and Sound in Control Panel, you can open the Volume and Sound Properties
window. You can select volume level and configure activation and deactivation of sound
according to various events through the check boxes provided.
Date/Time
With Date/Time in Control Panel, you can configure date and time of the terminal using the
Date/Time Properties window. Select a month using the arrow buttons and click a date. To
change the AM/PM, hour, minutes, and seconds of the current time, click in each item and then
enter a value directly or click the arrows buttons. In addition, if you want your terminal's clock to
be adjusted automatically when daylight saving time changes, check the Automatically adjust
clock for daylight saving changes check box.
Certificates
With Certificates in Control Panel, you can import, view or remove a certificate. A certificate can
be imported from a file or smart card. If your terminal does not provides a smart card reader, the
smart card item is displayed deactivated when you click Import. If you click Remove with a
certificate selected, it will be deleted immediately without displaying any confirmation message. If
you want to save a deleted certificate again, click Control Panel -> System and check the Reset
the terminal to factory default settings checkbox.
Software Setup
With Software Setup in Control Panel, you can update modules. Click Add and enter the IP
address of the host PC that contains update files. Your monitor will connect to the host PC,
download update files and update modules. Update progressions are displayed on message
boxes or on the status bar. When the updates finishes, click Close and restart your terminal.
When restarted, open the Software Setup window and you can identify the name, version, and
size of installed programs.