Filter
Top Products
Menu Description
(Available in Analog mode only)
Note
When TV signal is input in AV mode ,select “Screen Fit “to adjust
vertical position in 0-6 levels.
Image Size
Note
Supplied for the wide models only such as 16:9 or 16:10.
You can change the size of the screen displayed on your monitor.
PC signals
• Auto - The screen is displayed in accordance with the screen aspect
ratio of the input signals.
• Wide - A full screen is displayed regardless of the screen aspect
ratio of the input signals.
Note
• Signals not available in the standard mode table are not supported.
• If the wide screen which is the optimal resolution for the monitor
is set on your PC, this function is not performed.
AV signals
• 4 : 3 - Sets the picture to 4:3 normal mode.
• 16 : 9- Sets the picture to 16:9 wide mode.
• Screen Fit- Use the function to see the full image without any cutoff
when DVI (480p/576p/720p/1080i/1080p) signals are input.
Note
It can only be selected if an external input is connected to the DVI
terminal and the 'PC/AV Mode' is set to 'AV'.
• 4 : 3 - Sets the picture to 4:3 normal mode.
• Wide-Sets the picture to 16:10 wide mode.
• Screen Fit- Use the function to see the full image without any cutoff
when DVI (480p/576p/720p/1080i/1080p) signals are input.
Note
• It can only be selected if an external input is connected to the DVI
terminal and the 'PC/AV Mode' is set to 'AV'.
• When the panel is of 16:10,the screen size options include
“4:3”,”wide “,”Screen fit“.
Adjusting the Monitor
34