Samsung B2030 Computer Monitor User Manual


 
5-1 Troubleshooting
5 Troubleshooting
5-1 Monitor Self-Diagnosis
You can check if the product is working properly using the Self-Diagnosis function.
If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform
the self-diagnosis function according to the procedures below.
1. Turn the product and the PC off.
2. Separate the signal cable from the product .
3. Turn the product on.
4. If the product is working properly, the <Check Signal Cable> message appears.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The
product is working properly.