Filter
Top Products
13
3. MagicLAN Installation For
Windows 98/ME/2000/XP/CE
We will explain the installation method for SWL-2200U(Mini USB Adapter)
.
3.1 Installation Overview
Here are some steps you will perform in establishing your wireless network connection:
1. Install the Access Point at first. AP is needed in case of Infrastructure network
mode.
2. You should install the Wireless LAN Card (SWL-2200U).
3. Install the software using the Installation CD.
4. Install the network protocol(s) required to communicate on your network. Most
likely you will need the TCP/IP protocol.
3.2 Installation Procedure of Windows 98
Please follow the following steps one by one to install the Mini USB Adapter successfully.
< Method 1 - Inserting card first >
1. Insert the Mini USB Adapter into the USB slot of your computer.
2.
Add New Hardware Wizard
appeared and the system looks for “USB
Device”. Press
NEXT
button and check if
Search for the best driver for your
device(recommended)
is slected and then press
NEXT
button . Insert the
MagicLAN Installation CD into the CD-ROM drive.
3. Mark the
Specify a location
tap and type “
E:\Drivers
” right below in this
tap(Where E is the CD-drive of your PC).