Filter
Top Products
Rev. 2.01
- 22 -
SRP-370/372 Ver.2
4. Specification
Printing method Thermal line printing
Dot density
180 X 180 dpi
(7dots/mm)
203 X 203 dpi
(8dots/mm)
Printing width 72mm
Paper width 58mm, 80mm, 83mm
Characters per line (default) 180 DPI 42 (Font A)
56 (Font B)
203 DPI 48 (Font A)
64 (Font B)
180 DPI Mono : 47 lines/sec(1/6” Feed) 200mm/sec
Color : 23.6 Line/ Sec(1/6inch feed) 100mm/sec
Printing speed
203 DPI Mono : 52 lines/sec(1/6” Feed) 195mm/sec
Color : 21 Line/ Sec(1/6inch feed) 90mm/sec
Receive Buffer Size 64K Bytes
※ NOTE
Printing speed may be slower, depending on the data transmission speed and the
combination of control commands.
SMPS Input voltage 100~240 VAC
Frequency 50/60 Hz
Supply voltage
SMPS Output voltage 24 VDC
Temperature
0 ~ 45 ℃ (Operating)
-10 ~ 50 ℃ (Storage)
Environmental
Conditions
Humidity 30 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
; Except for paper
MCBF *
Mechanism
Monochrome :70,000,000Lines
2Color :35,000,000Lines
Auto cutter life * 1,500,000 Cut
* These values are calculated under printing level 2 with recommended paper at normal
temperature.
* These values may vary with environment temperature, printing level, etc.