Filter
Top Products
19
English
Adjusting Your Monitor
Sync. Input Type
Use this menu to set your monitor to the correct
type of synchronization. Select “Separate” if the
computer is sending a separate synchronization
signal. Select “Sync. on Green” if the computer
expects the monitor to synchronize with the green
signal it sends. Refer to your computer or video
card user’s manual to determine the correct setting.
1
With the menu off, push the button.
Push the button or button until the
“Advanced” screen is displayed.
2
Push the button or button to select
Sync. Input Type
.
3
Push the button to open the sync input
type selection screen.
4
Use the button or button to select
Separate
or
Sync. on Green
.
Video Input Level
Some video cards use video signals higher than 1.0
V which causes the display to be very bright. For
those video cards, use this feature to select the 1.0
V Level.
1
With the menu off, push the button.
Push the button or button until the
“Advanced” screen is displayed.
2
Push the button or button to select
Video Input Level
.
3
Push the
button to open the video input
level selection screen.
4
Use the or buttons to select 0.7 V or
1.0 V.
RGB
:
+++
G
Advanced
Degauss
Recall
Sync. Input Type
Video Input Level
D-SUB/BNC
Access Function
:
Sync. Input Type
Separate
Sync. on Green
Previous Menu
RGB
:
+++
G
Advanced
Degauss
Recall
Sync. Input Type
Video Input Level
D-SUB/BNC
Access Function
:
Video Input Level
0.7 V 1.0 V
Previous Menu
1100pe6.book Page 19 Tuesday, January 4, 2000 1:46 PM