Filter
Top Products
7
English
Setting up Your Monitor
Figure 2. Monitor self test screen
The three boxes inside the border are red, green and blue. Failure of any of the boxes to
appear indicates a problem with your monitor. This box also appears during normal operation
if the video cable becomes disconnected or damaged.
4
Turn off your monitor and reconnect the video cable; then turn on both your computer
and the monitor.
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system; your monitor is functioning properly.
Getting Help
If your monitor does not display an image, check your cable connections and refer to
Troubleshooting on page 23.
Warm-up Time
All monitors need time to become thermally stable the first time you turn them on each day.
Therefore, to achieve more accurate adjustments for parameters, allow the monitor to warm
(be on) for at least 30 minutes before making any screen adjustments.
Check Signal Cable
No Connection
1100pe6.book Page 7 Tuesday, January 4, 2000 1:46 PM