Filter
Top Products
5-14
Disassembly and Reassembly
Samsung Electronics
Service Manual
5.14 Transfer Roller
1. Before you remove the Transfer Roller you should
remove:
- Rear Cover (see page 5-2)
- Side Covers (see page 5-3)
- Scanner Ass’y (see page 5-4)
- Middle Cover (see page 5-6)
- LSU(see page 5-9)
2. Remove 3 screws and take the Transfer Earth out.
3. Unplug the PTL Holder Connector then remove the
PTL Holder and PTL Lens as shown below. Take care
to note the orientation of the PTL lens and ensure it is
refitted correctly
4. Unlatch the Bush and remove it. Then lift the Transfer
Roller out, as shown below.
Transfer
Roller
Bush
Transfer
Earth
PTL
Holder
PTL
Lens