Samsung SLM2625DXAC Printer User Manual


 
Wired network setup
105
2. Using a network-connected machine
IPv4 configuration using SetIP (Linux)
Before using the SetIP program, disable the computer firewall from System
Preferences or Administrator.
The following instructions may vary from your model or operating systems.
1
Open /opt/Samsung/mfp/share/utils/.
2
Double-click the SetIPApplet.html file.
3
Click to open the TCP/IP configuration window.
4
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 102) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
5
The machine will automatically print the Network Configuration
Report.
6
IPv6 configuration
IPv6 is supported properly only in Windows Vista or higher.
Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 6 ).
If the IPv6 network seems to not be working, set all the network setting
to the factory defaults and try again using Clear Setting.
The machine supports the following IPv6 addresses for network printing and
managements.
Link-local Address: Self-configured local IPv6 address (Address starts with
FE80).
Stateless Address: Automatically configured IPv6 address by a network
router.
Stateful Address: IPv6 address configured by a DHCPv6 server.
Manual Address: Manually configured IPv6 address by a user.