Filter
Top Products
SNS-100/400 Network Server
12
Ch3. Installation and Setting
3.1. Power Input
DC Power
Only DC12V power may be supplied to this product.
When using an adapter different from the one supplied by us (DC12V/4A), make sure that it is DC12V/2A or higher.
DC Only
For SNS-400, the recommended adapter specs are DC12V/2A, therefore, only use standard adapters.
Chart 3-1 When the copper wire’s resistance is [20℃(68℉)]
Copper Wire Size (AWG) #24(0.22㎟) #22(0.33㎟) #20(0.52㎟) #18(0.83㎟)
Resistance (Ω/m)
0.078 0.050 0.030 0.018
DROP Voltage(V/m)
0.028 0.018 0.011 0.06
y As seen in Chart 3-1, a voltage drop occurs and thus, in the case that the adapter output wire’s length is excessively connected
to the network, a problem can occur with the network server.
※ Server Operation Voltage: DC 12V±10%
※ Depending on the type and manufacturer of the voltage load wire described in the above chart, there may be a deviation.
3.2. Connecting to Monitor
Connect the video output terminal on the back of the product to the monitor input terminal.
SNS-100 Network Server Monitor
y Connection methods may differ depending on the used monitor and peripheral devices, so please refer to the users’ manual.
y Always connect after turning the device’s power off.