Filter
Top Products
2-15 Installation and Connection
2-15 Connecting using a Video/S-Video cable
The appearance and the color may differ depending on the model.
Make sure that the AV device and your projector are turned off.
1. Connect the [VIDEO] or [S-VIDEO IN] terminal and the AV device using a Video cable (Not supplied) or S-Video cable (Not
supplied).
- For supported input signal formats, see AV Timing (VIDEO/S-VIDEO ) in section 2-8, "Supported Display Modes".
2. Connect the [AV IN (L-AUDIO-R)] terminal on the back of the projector and the Audio out terminal on your AV device using an
audio cable (Not supplied).