Filter
Top Products
3-6 Using
3-6 Network Management
3-6-1. Management using the Web Browser
The Web Browser lets you monitor and control one projector from a PC without installing any software. Before you
can use the Web Browser, you must connect your projector to your local area network. For directions explaining how
to connect to a network,
see section 2-18, Connecting to a Network.
To control multiple projectors from a single PC, install and run Samsung Projector Manager.
For information about Samsung Projector Manager, go to 3-6-2
.
Check the network connection between the PC and projector before connecting the Web Browser. If the network
connection has failed, the Web browser window may not be available for use.
• To use the Web Browser, your PC must meet the following minimum system requirement :
• RAM : More than 10MB
• Hard Disk capacity: More than 10MB
• Display resolution: More than 640 x 480
• Supported OS : Microsoft Windows XP, Windows Vista
• Web browser : Microsoft Internet Explorer 6 or later version, Netscape Navigator 9 or later version, Mozilla FireFox 3.0.x or later
version, Google Chrome.
1. Connecting
• Enter the projector's IP address into the web browser address bar.
Find the projector's IP address by pressing the [MENU] button and selecting <Setup> -> <Network> -> <IP Setting>.
• The Network Projector window appears. For information about control items in the Network Projector window, refer to the
items under Section 3-5, Using the Screen Adjustment Menu.
• Some functions listed in 'Using the Screen Adjustment Menu' cannot be used in the web browser because of limitations in
remote control by the network.